Uni-Drive Wrapped V-Belt, Uni Cogged V-Belt (Classical & Narrow Vee / Wedge)
CLASSICAL, NARROW VEE, COGGED RAW EDGE, VEE-BELT SECTION M, Z, A, B, 20, C, 25, D, E, F, SPA, SPB, SPC, SPZ, 3V, 5V, 8V, Raw Edge: ZX, AX, BX, CX, XPZ, XPA, XPB, XPC, AV10, AV13, 3VX, 5VX, 8VX,
Automotive Belts: AVX10 (9.5), AVX13 (12.5), AVX15, AVX17, AVX22, PK (CR, EPDM), ZA, RPP, YU, RU, MY, ZBS, S8M, YS etc.
WRAPPED BELT RANGE
Features
- Oil Resistant & Antistatic
- Maximum Belt Linear Speed (Classical section up 30 m/sec, Wedge: Up to 42 m/sec, Narrow: Up to 45 m/sec)
- Temperature range: -18 deg C to +80 deg C
- ATEX certified FRAS (Fire resistant belts are also available)
Applications: Industrial drives such as pumps, generators, ball-mills, crushers, conpressors, etc.
| Section | Top Width (mm) |
Thickness (mm) |
Angle (Degree) |
Standard | Min. Pulley Dia. (mm) |
Min Mfr Range | Max Mfr Range | Lp to La (mm) |
Li to Lp (mm) |
Li to La (mm) |
Length Desig. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CLASSICAL SECTION | |||||||||||
| 8 | 8.0 | 5.0 | 40 | DIN 2215-1975 | 40 | 39” | 174” | 12 | 19 | 31 | Li |
| Z | 10.0 | 6.0 | 40 | IS 2494, BS 3790, ISO 4184 | 50 | 9.5” | 176” | 16 | 22 | 38 | Li |
| A | 13.0 | 8.0 | 40 | IS 2494, BS 3790, ISO 4184 | 71 | 13” | 357” | 14 | 36 | 50 | Li |
| B | 17.0 | 11.0 | 40 | IS 2494, BS 3790, ISO 4184 | 112 | 16” | 900” | 26 | 43 | 69 | Li |
| 20 | 20.0 | 13.0 | 40 | IS 2494, BS 3790, ISO 4184 | 160 | 31.5” | 900” | 31 | 48 | 79 | Li |
| C | 22.0 | 14.0 | 40 | IS 2494, BS 3790, ISO 4184 | 180 | 31” | 900” | 32 | 56 | 88 | Li |
| 25 | 25.0 | 16.0 | 40 | DIN 2215-1975 | 250 | 57” | 900” | 39 | 61 | 100 | Li |
| D | 32.0 | 19.0 | 40 | IS 2494, BS 3790, ISO 4184 | 355 | 44.5” | 900” | 40 | 79 | 119 | Li |
| E | 38.0 | 23.0 | 40 | IS 2494 | 500 | 90” | 900” | 53 | 92 | 145 | Li |
| WEDGE SECTION | |||||||||||
| SPZ | 10.0 | 8.0 | 40 | BS 3790 | 63 | 365mm | 4000mm | 13 | 37 | 50 | Lp |
| SPA | 13.0 | 10.0 | 40 | BS 3790 | 90 | 576mm | 9110mm | 18 | 45 | 63 | Lp |
| SPB | 17.0 | 14.0 | 40 | BS 3790 | 140 | 1000mm | 16824mm | 28 | 60 | 88 | Lp |
| 19 | 19.0 | 15.0 | 40 | DIN 7753 | 180 | 2253mm | 9137mm | 25 | 69 | 94 | Lp |
| SPC | 22.0 | 18.0 | 40 | BS 3790 | 224 | 1861mm | 22943mm | 30 | 83 | 113 | Lp |
| NARROW SECTION | |||||||||||
| 3V | 9.7 | 8.0 | 40 | RMA IP 22 | 63 | 19.5" | 160" | 13 | 37 | 50 | La |
| 5V | 15.8 | 14.0 | 40 | RMA IP 22 | 140 | 47" | 657" | 25 | 60 | 85 | La |
| 8V | 25.4 | 23.0 | 40 | RMA IP 22 | 355 | 100" | 905" | 53 | 92 | 145 | La |
| LIGHT DUTY SINGLE V-BELTS | |||||||||||
| 3L | 9.65 | 5.59 | 40 | RMA IP 23 | 45 | 10.5" | 177" | 16 | 22 | 38 | La |
| 4L | 12.7 | 7.87 | 40 | RMA IP 23 | 65 | 15.0" | 359" | 14 | 36 | 50 | La |
| 5L | 16.7 | 9.65 | 40 | RMA IP 23 | 91 | 21.0" | 242" | 26 | 43 | 69 | La |
COGGED BELT RANGE
Features
- Oil Resistant & Antistatic
- Maximum Belt Linear Speed (Classical section up 30 m/sec, Wedge: Up to 42 m/sec, Narrow: Up to 45 m/sec)
- Higher power transmission capacity than wrapped belts
- Superior tranverse stiffness & high wear resistance
- Suitable for drives with small pulley diameters, high ambient temperature & speed
- Temperature range: -25deg C to +100deg C
- ATEX certified FRAS (Fire resistant belts are also available)
Applications: General Engineering, all industrial belt drives
Note: These sizes are indicative & denote minimum and maximum range. Intermediate sizes are available on request.
| Section | Top Width (mm) |
Thickness (mm) |
Angle (Degree) |
Standard | Min. Pulley Dia. (mm) |
Min Mfr Range | Max Mfr Range | Lp to La (mm) |
Li to Lp (mm) |
Li to La (mm) |
Length Desig. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CLASSICAL SECTION – RAW EDGE COGGED BELTS | |||||||||||
| ZX | 10.0 | 6.0 | 36 | IS 2494, BS 3790, ISO 4184 | 40 | 23.5” | 200” | 16 | 22 | 38 | Li |
| AX | 13.0 | 8.0 | 36 | IS 2494, BS 3790, ISO 4184 | 63.0 | 23.5” | 200” | 14 | 36 | 50 | Li |
| BX | 17.0 | 11.0 | 36 | IS 2494, BS 3790, ISO 4184 | 90.0 | 23.5” | 200” | 26 | 43 | 69 | Li |
| CX | 22.0 | 14.0 | 36 | IS 2494, BS 3790, ISO 4184 | 140.0 | 23.5” | 200” | 32 | 56 | 88 | Li |
| DX | 32.0 | 19.0 | 36 | IS 2494, BS 3790, ISO 4184 | 280.0 | 40.0” | 200” | 40 | 79 | 119 | Li |
| WEDGE SECTION – RAW EDGE COGGED BELTS | |||||||||||
| XPZ | 10.0 | 8.0 | 36 | BS 3790 | 56.0 | 600mm | 5100mm | 13 | 37 | 50 | Lp |
| XPA | 13.0 | 10.0 | 36 | BS 3790 | 71.0 | 600mm | 5100mm | 18 | 45 | 63 | Lp |
| XPB | 17.0 | 14.0 | 36 | BS 3790 | 112 | 600mm | 5100mm | 28 | 60 | 88 | Lp |
| XPC | 22.0 | 18.0 | 38 | BS 3790 | 180.0 | 600mm | 5100mm | 30 | 83 | 113 | Lp |
| NARROW SECTION – RAW EDGE COGGED BELTS | |||||||||||
| 3VX | 9.7 | 8.0 | 38 | RMA IP 22 | 56 | 23.5" | 200" | 13 | 37 | 50 | La |
| 5VX | 15.8 | 14.0 | 38 | RMA IP 22 | 112 | 23.5" | 200" | 25 | 60 | 85 | La |
| 8VX | 25.4 | 23.0 | 38 | RMA IP 22 | 254.0 | 90" | 200" | 53 | 92 | 145 | La |
| LIGHT DUTY SINGLE V-BELTS – RAW EDGE COGGED | |||||||||||
| 2LX | 6.30 | 4.00 | 36 | RMA IP 23 | 25 | 23.5" | 118" | - | - | - | La |
| 3LX | 9.65 | 5.59 | 36 | RMA IP 23 | 36.0 | 23.5" | 118" | 16 | 22 | 38 | La |
| 4LX | 12.7 | 7.87 | 36 | RMA IP 23 | 58.0 | 23.5" | 118" | 14 | 36 | 50 | La |
| 5LX | 16.7 | 9.65 | 36 | RMA IP 23 | 72 | 23.5" | 118" | 26 | 43 | 69 | La |